Display Board pt5

 All the flocking is dry and complete and I have set up all the initial terrain I plan to use for the display. I'm still waiting on the water effects to arrive so I can add some in the ruts. I also need to add some glue to the thatched roof to get it to lay down. Initially I'll use it to display my Bolt Action German force in a tournament next month. I'm hoping to win best themed. I have left the buildings and other terrain elements removable so that I can customize it for skirmish games. Replacing the buildings with some half timber framed Saxon ones would make it work perfect for a skirmish battle. Could use it with Fistful of Lead rules Might and Melee set in early to mid medieval. I could put trees over the area were the log piles are to make the edge of a forest and run an ambush scenario. 

Overall I am very happy with this. I learned a good deal and think I could make more tiles that go together. I didnt make this specific one with that though in mind so it might be hard to integrate it into others but it served as a good proof of concept. 

Display Board pt4

Today I got the flocking done on my display/skirmish board. I used Army Painter flock and Huge Miniatures static grass and flowers. Glue is still drying in these photos so you can see it a bit through the flock. Next I'll add some water effects in the ruts. I decided not to flock the smaller fenced area so it could be used for live stock while the larger one will be a garden.

 

Display Board pt3

 For the texture I added sand over the entire board though I used a coarser grit for the "wild" areas and a fine grit for the road and yards. I imagine the difference being the pulverized sediment from traffic, both foot and vehicle. 

Once the glue had dried I painted over all of it using  craft smart Brown. Then a heavy dry brush of Golden Brown. I went back over the fine grit areas with a final dry brush of Khaki for a more exposed and dry look. 

Next will come the flocking.

Display Board pt2

Next I took a sheet of 1/2 inch foam and cut it to cover everything except the roads, houses, and yards. Then I beveled the edges with my dremel and sanding tool. I wanted the roads to have a sunken and warn look. The house will be left removable for transport, storage, and use in other setups. 

Next I glued on the 3d printed fences where I wanted them to go.

 

Display Board

 I will be playing in my 2nd Bolt Action Tournament this coming March and it will be a 750pt Combat Patrol game. In addition the the lower points cap. All vehicles must be open topped and a 7+ armor or less. I decided to go with a German Anti-Partisan Force themed on the Eastern Front. I'll do a separate post about the force composition but in edition to the 5 vehicles and 29 miniatures I need to paint I have decided to also build a 2 foot by 2 foot display board for them. 

I started with a standard 2in thick 2x2 foam insolation panel from local hardware for the base. I then set out some of my Eastern front 4 Ground buildings from my WW1 collection and some 3d printed terrain. Next I laid out the part of the force I have and played around with the narrative I wanted it to tell. 

When I had a good idea of a vision I removed the miniatures and traced out all the terrain elements to make a template of my idea. I want to display a small cross roads and farm stead where the patrol has stopped and engaged partisans (I plan on make some dead partisan minis). 

The first element I began construct were the ruts in the roads. I wanted these to be cut into the board and to show their heavy use on a dirt road. I used a foam wire cutter to carve them out and then ran some sand paper along the sides.

I made the ruts wider so that when I add dirt and texture they should fill in to the desirable size.